The braking system of a golf cart is a key component for the safety of the vehicle's driving, and if there is a problem with this system, it will affect the normal driving of the vehicle. Therefore, in order to ensure the safe driving of the golf cart, it is necessary to modify its brake system. The following are the main steps to modify the braking system of a golf cart. I. Check the brake system First of all, before the modification, check the brake system carefully, check the wear of brake pads, brake fluid, buffers, brake pedal and other components, if any damage is found, it should be replaced in time to ensure the normal operation of the brake system. II. Replace the brake pads Replacing the brake pads is the most important step in modifying the brake system. First, the vehicle should be placed safely to ensure the safety of the vehicle, then, open the brake pad screws, remove the brake pads, install the new brake pads to the original position, install the screws, then, lubricate the brake pads with oil to prevent wear and tear, and finally, tighten the brake pads with a mushroom head to ensure the stability of the brake pads. III. Replace the brake fluid After installing the new brake pads, you should replace the brake fluid in time. Firstly, drain the original brake fluid and then add the new brake fluid to the brake system, which should be noted that the amount of oil should not be too much to avoid affecting the normal operation of the brake system. IV. Replace the buffer The buffer is an important part of the brake system. If the buffer is damaged, it will affect the normal operation of the brake system, therefore, it needs to be replaced in time to ensure the normal operation of the brake system. V. Replace the brake pedal The brake pedal is an important part of the golf cart brake system, its role is to connect the brake pads with the brake fluid. If the brake pedal is found to be damaged, it should be replaced in time to ensure the normal operation of the brake system. VI. Check the brake system Finally, the brake system should be inspected to check whether the brake pads, brake fluid, buffers, brake pedal and other components are correctly installed, and if they are, the vehicle can be driven normally. The above is the specific operation process of golf cart brake system modification, if you want to ensure the safe operation of the vehicle, timely replacement of brake system components is necessary to help the safe operation of the vehicle.